Super-finishing is a specialized technique known for its exceptional precision and is vital for enhancing component quality and performance. Originating around the 1930s, this method was developed to refine a component’s surface finish while improving micro-contour accuracy, including roundness, straightness, and cylindricity.
This article will take you through the intricate process of super-finishing, revealing its pivotal role in achieving mirror-like finishes and elevating performance across industries beyond racing motorcycles.
Let’s start exploring!
Understanding the Versatility of Super-Finishing
Super-finishing is a game-changer not limited to a single industry. It holds remarkable potential across various sectors, from medical to aerospace.
Here, we will explore the broad applications of super-finishing, which extends beyond automotive parts to encompass intricate components such as hip and spine implants and critical aerospace elements, including turbine et landing gear parts.
Super-Finishing’s Universal Application
This remarkable technique can be used in virtually any OD (outer diameter) application where precision matters, involving removing minute stock amounts, typically ranging from 0.002 to 0.005 mm from the diameter.
While it’s most commonly associated with steel, super-finishing isn’t limited to this material; it extends to exotic alloys, titane, aluminium, and even delicate substances like glass and ceramic.
The Cold Material Process
One of the standout features of super-finishing is that it’s a cold material process. It eliminates the thermally damaged layer left behind by previous abrasive machining operations such as grinding. The absence of this damaging thermal effect significantly enhances component durability.
Extending the Life of Components
To put this into perspective, consider the bearing surfaces of engine crankshafts or camshafts. Without super-finishing, these components would be stressed and worn, leading to engine breakdowns every 20,000-30,000 miles.
However, with super-finishing, the longevity of today’s engines increases significantly, with lifespans often reaching 200,000-300,000 miles.
The Magic of Super-Finishing
The secret to super-finishing’s effectiveness lies in the depths of the cut. Traditional turning or grinding processes might remove material depths ranging from 50-100 microns or more, generating substantial heat.
Yet, super-finishing works differently, removing just 1-2 microns of stock on the radius while requiring significantly less energy. This cold ultra-precision machining process revolutionizes precision and durability, making it an indispensable technique in modern manufacturing.
Your Guide to Selecting the Right Finishing Process
En finishing processes, the best choice varies depending on the particular use and the results you want to achieve; there’s no single solution that works for everything. To make a well-informed decision, it’s crucial to understand the differences between common ultra-fine finishing methods:
- Flat Lapping: This technique is tailored for refining flat surfaces by employing loose abrasives. It significantly improves surface finish while also enhancing part flatness. So, if your application requires precisely flat surfaces, flat lapping is an excellent option.
- Honing: Honing focuses on enhancing the finish of internal diameters using fixed abrasives. Unlike many other processes, honing is a cold process that generates no heat. This results in improved surface finish and micro-contour accuracy. It’s the method of choice when you need precise interior finishing without the risk of heat-induced damage.
- Microfinishing/ Superfinishing: For exterior diameters and faces, microfinishing and superfinishing come into play. These methods employ fixed abrasives and, importantly, are also cold processes. The primary objective is to enhance both surface finish and micro-contour accuracy. Therefore, these processes are invaluable when you require precise, high-quality surface finishing for external features.
- Polissage: Polishing, on the other hand, concentrates on refining outside features using loose abrasives. While it provides flexibility in various applications, it’s not a cold process, and heat generation can be a concern. Polishing achieves a commendable surface finish but may compromise micro-contour accuracy in the process. It is ideal when aesthetics are your top priority, mainly if part geometry isn’t critical.
- Superfinishing with Tape: This approach combines the precision of superfinishing with the advanced “D-flex” band technology to achieve consistent results, even when dealing with varying diameters. Using tape in superfinishing ensures that you can maintain precision throughout the process.
What is the Stream Finishing Process?
Stream finishing is an ultra-precision machining method that employs fine-grain media with a high density, typically much smaller than those used in conventional vibratory-finishing processes.
This specialized process revolves around immersing workpieces, either singly or in groups, within a chamber filled with abrasive media. The abrasive media combines tensides and corrosion-protective materials, resulting in a mixture that resembles wet sand.
Here, the key to stream finishing is the intricate interaction between the workpiece and the abrasive media. The workpiece or workpieces are mounted on a workpiece holder and immersed in the abrasive media within the chamber.
As a result, the process is executed at specific angles and rotations. However, keep in mind that the speed of both the workpiece and the abrasive media, as well as the immersion angle of the parts, are all highly dependent on the specific application.
8 Key Benefits of Stream Finishing
1. Exceptional Surface Smoothness
Stream finishing can achieve surface smoothness values as fine as 0.01-micron Ra, which is particularly suitable for high-precision components like gears. This remarkably smooth surface reduces friction, leading to less heat generation and noise during operation.
2. Extended Component Life
One of the significant advantages of stream finishing is its ability to eliminate the need for the prolonged running-in of engines and gearboxes. This not only extends the life of the components but also reduces oil contamination. In many cases, it has led to a remarkable increase in the interval between oil changes.
3. Significant Reduction in Heat and Noise
By significantly reducing heat generation and noise emissions compared to conventional grinding methods, stream finishing is especially valuable for critical applications. It not only enhances performance but also contributes to a quieter and cooler operational environment.
4. Minimized Micropitting
Stream finishing effectively reduces micro pitting, a common issue with gear wheels, often leading to premature wear and damage. Micropitting occurs when the lubricating film between gear teeth breaks down at localized points. This is a critical benefit for components subject to high wear and friction.
5. Rapid Processing for High-Value Parts
Stream finishing is an efficient process, particularly suited for high-value parts. Unlike mass finishing methods that may take hours, ultra-fine finishing typically takes a minute or less to achieve the desired results.
6. Two-Stage Processing: Grinding and Polishing
The process can be divided into two stages, beginning with a grinding process and followed by polishing. The initial stage removes material, while the polishing step further refines the surface. This combination leads to a reduction in peak heights while maintaining essential surface valleys for improved lubrication.
7. Attractive, Polished Appearance
Stream finishing provides components with an attractive, mirror-like appearance. This holds even for intricate and challenging areas that are often difficult to reach with other methods.
8. Enhanced Performance and Durability
In practical applications, stream finishing has demonstrated a considerable increase in performance, typically around 5%, offering benefits like quicker power delivery and cooler running. Importantly, this process enhances the lifespan of components, reducing wear and the need for costly maintenance and servicing.
Super Finishing vs. Stream Finishing: A Comparison
Superfinishing and stream finishing are two distinct surface enhancement techniques employed in manufacturing. While both aim to improve surface quality, they differ significantly in their methods and applications.
| Feature | Super Finishing | Stream Finishing |
| Enlèvement de matériaux | Minimal material removal (1-2 microns) | Minimal material removal |
| Heat Generation | Cold process, minimal heat | Cold process, minimal heat |
| Surface Smoothness | Achieves very smooth surfaces | Achieves smooth surfaces |
| Ideal Applications | High-precision parts, aerospace, bearings | High-value parts, precision-critical tasks |
| Benefits | Extends component life, reduces friction | Extends component life, reduces micro pitting |
Both super finishing and stream finishing offer cold material processes, preserving the integrity of components and enhancing surface quality. However, the choice between them depends on the specific application, required surface smoothness, and the level of precision necessary for the components.
Conclusion
When considering super-finishing or other machining and finishing processes, it’s vital to evaluate the specific needs of your project. Think about the level of precision, the surface quality required, and the performance expectations of the components.
For those seeking professional services in Usinage CNC et moulage par injection, look no further than Prototool. Prototool is known for its outstanding performance and dedication to accuracy, providing various manufacturing options. Whether you require super-finishing, micro-finishing, or any other high-finish machining service, Prototool is your trusted partner in unlocking the full potential of your manufacturing projects.
Choose precision, choose quality—choose Prototool for all your CNC machining and injection molding needs. Your path to manufacturing excellence begins here.
